پودمان:String2

از اسلامیکال
نسخهٔ تاریخ ‏۲۵ ژانویهٔ ۲۰۲۳، ساعت ۱۵:۳۰ توسط Haghjoo (بحث | مشارکت‌ها) (ایجاد پودمان)
(تفاوت) → نسخهٔ قدیمی‌تر | نمایش نسخهٔ فعلی (تفاوت) | نسخهٔ جدیدتر ← (تفاوت)
پرش به ناوبری پرش به جستجو

توضیحات این پودمان می‌تواند در پودمان:String2/توضیحات قرار گیرد.

local p = {}

p.trim = function(frame)
	return mw.text.trim(frame.args[1] or "")
end

p.sentence = function (frame)
	-- {{lc:}} is strip-marker safe, string.lower is not.
	frame.args[1] = frame:callParserFunction('lc', frame.args[1])
	return p.ucfirst(frame)
end

p.ucfirst = function (frame )
	local s =  mw.text.trim( frame.args[1] or "" )
	local s1 = ""
	-- if it's a list chop off and (store as s1) everything up to the first <li>
	local lipos = mw.ustring.find(s, "<li>" )
	if lipos then
		s1 = mw.ustring.sub(s, 1, lipos + 3)
		s = mw.ustring.sub(s, lipos + 4)
	end
	-- s1 is either "" or the first part of the list markup, so we can continue
	-- and prepend s1 to the returned string
	local letterpos
	if mw.ustring.find(s, "^%[%[[^|]+|[^%]]+%]%]") then
		-- this is a piped wikilink, so we capitalise the text, not the pipe
		local _
		_, letterpos = mw.ustring.find(s, "|%A*%a") -- find the first letter after the pipe
	else
		letterpos = mw.ustring.find(s, '%a')
	end
	if letterpos then
		local first = mw.ustring.sub(s, 1, letterpos - 1)
		local letter = mw.ustring.sub(s, letterpos, letterpos)
		local rest = mw.ustring.sub(s, letterpos + 1)
		return s1 .. first .. mw.ustring.upper(letter) .. rest
	else
		return s1 .. s
	end
end

p.title = function (frame )
	-- http://grammar.yourdictionary.com/capitalization/rules-for-capitalization-in-titles.html
	-- recommended by The U.S. Government Printing Office Style Manual:
	-- "Capitalize all words in titles of publications and documents,
	-- except a, an, the, at, by, for, in, of, on, to, up, and, as, but, or, and nor."
	local alwayslower = {['a'] = 1, ['an'] = 1, ['the'] = 1,
		['and'] = 1, ['but'] = 1, ['or'] = 1, ['for'] = 1,
		['nor'] = 1, ['on'] = 1, ['in'] = 1, ['at'] = 1, ['to'] = 1,
		['from'] = 1, ['by'] = 1, ['of'] = 1, ['up'] = 1 }
	local res = ''
	local s =  mw.text.trim( frame.args[1] or "" )
	local words = mw.text.split( s, " ")
	for i, s in ipairs(words) do
		-- {{lc:}} is strip-marker safe, string.lower is not.
		s = frame:callParserFunction('lc', s)
		if i == 1 or alwayslower[s] ~= 1 then
			s = mw.getContentLanguage():ucfirst(s)
		end
		words[i] = s
	end
	return table.concat(words, " ")
end

-- findlast finds the last item in a list
-- the first unnamed parameter is the list
-- the second, optional unnamed parameter is the list separator (default = comma space)
-- returns the whole list if separator not found
p.findlast = function(frame)
	local s =  mw.text.trim( frame.args[1] or "" )
	local sep = frame.args[2] or ""
	if sep == "" then sep = ", " end
	local pattern = ".*" .. sep .. "(.*)"
	local a, b, last = s:find(pattern)
	if a then
		return last
	else
		return s
	end
end

-- stripZeros finds the first number and strips leading zeros (apart from units)
-- e.g "0940" -> "940"; "Year: 0023" -> "Year: 23"; "00.12" -> "0.12"
p.stripZeros = function(frame)
	local s = mw.text.trim(frame.args[1] or "")
	local n = tonumber( string.match( s, "%d+" ) ) or ""
	s = string.gsub( s, "%d+", n, 1 )
	return s
end

-- nowiki ensures that a string of text is treated by the MediaWiki software as just a string
-- it takes an unnamed parameter and trims whitespace, then removes any wikicode
p.nowiki = function(frame)
	local str = mw.text.trim(frame.args[1] or "")
	return mw.text.nowiki(str)
end

-- split splits text at boundaries specified by separator
-- and returns the chunk for the index idx (starting at 1)
-- #invoke:String2 |split |text |separator |index |true/false
-- #invoke:String2 |split |txt=text |sep=separator |idx=index |plain=true/false
-- if plain is false/no/0 then separator is treated as a Lua pattern - defaults to plain=true
p.split = function(frame)
	local args = frame.args
	if not(args[1] or args.txt) then args = frame:getParent().args end
	local txt = args[1] or args.txt or ""
	if txt == "" then return nil end
	local sep = (args[2] or args.sep or ""):gsub('"', '')
	local idx = tonumber(args[3] or args.idx) or 1
	local plain = (args[4] or args.plain or "true"):sub(1,1)
	plain = (plain ~= "f" and plain ~= "n" and plain ~= "0")
	local splittbl = mw.text.split( txt, sep, plain )
	if idx < 0 then idx = #splittbl + idx + 1 end
	return splittbl[idx]
end

-- val2percent scans through a string, passed as either the first unnamed parameter or |txt=
-- it converts each number it finds into a percentage and returns the resultant string.
p.val2percent = function(frame)
	local args = frame.args
	if not(args[1] or args.txt) then args = frame:getParent().args end
	local txt = mw.text.trim(args[1] or args.txt or "")
	if txt == "" then return nil end
	local function v2p (x)
		x = (tonumber(x) or 0) * 100
		if x == math.floor(x) then x = math.floor(x) end
		return x .. "%"
	end
	txt = txt:gsub("%d[%d%.]*", v2p) -- store just the string
	return txt
end

-- one2a scans through a string, passed as either the first unnamed parameter or |txt=
-- it converts each occurrence of 'one ' into either 'a ' or 'an ' and returns the resultant string.
p.one2a = function(frame)
	local args = frame.args
	if not(args[1] or args.txt) then args = frame:getParent().args end
	local txt = mw.text.trim(args[1] or args.txt or "")
	if txt == "" then return nil end
	txt = txt:gsub(" one ", " a "):gsub("^one", "a"):gsub("One ", "A "):gsub("a ([aeiou])", "an %1"):gsub("A ([aeiou])", "An %1")
	return txt
end

-- findpagetext returns the position of a piece of text in a page
-- First positional parameter or |text is the search text
-- Optional parameter |title is the page title, defaults to current page
-- Optional parameter |plain is either true for plain search (default) or false for Lua pattern search
-- Optional parameter |nomatch is the return value when no match is found; default is nil
p._findpagetext = function(args)
	-- process parameters
	local nomatch = args.nomatch or ""
	if nomatch == "" then nomatch = nil end
	--
	local text = mw.text.trim(args[1] or args.text or "")
	if text == "" then return nil end
	--
	local title = args.title or ""
	local titleobj
	if title == "" then
		titleobj = mw.title.getCurrentTitle()
	else
		titleobj = mw.title.new(title)
	end
	--
	local plain = args.plain or ""
	if plain:sub(1, 1) == "f" then plain = false else plain = true end
	-- get the page content and look for 'text' - return position or nomatch
	local content = titleobj and titleobj:getContent()
	return content and mw.ustring.find(content, text, 1, plain) or nomatch
end
p.findpagetext = function(frame)
	local args = frame.args
	local pargs = frame:getParent().args
	for k, v in pairs(pargs) do
		args[k] = v
	end
	if not (args[1] or args.text) then return nil end
	-- just the first value
	return (p._findpagetext(args))
end

-- returns the decoded url. Inverse of parser function {{urlencode:val|TYPE}}
-- Type is:
-- QUERY decodes + to space (default)
-- PATH does no extra decoding
-- WIKI decodes _ to space
p._urldecode = function(url, type)
	url = url or ""
	type = (type == "PATH" or type == "WIKI") and type
	return mw.uri.decode( url, type )
end
-- {{#invoke:String2|urldecode|url=url|type=type}}
p.urldecode = function(frame)
	return mw.uri.decode( frame.args.url, frame.args.type )
end

-- what follows was merged from Module:StringFunc

-- helper functions
p._GetParameters = require('Module:GetParameters')

-- Argument list helper function, as per Module:String
p._getParameters = p._GetParameters.getParameters

-- Escape Pattern helper function so that all characters are treated as plain text, as per Module:String
function p._escapePattern( pattern_str)
	return mw.ustring.gsub( pattern_str, "([%(%)%.%%%+%-%*%?%[%^%$%]])", "%%%1" )
end

-- Helper Function to interpret boolean strings, as per Module:String
p._getBoolean = p._GetParameters.getBoolean

--[[
Strip

This function Strips characters from string

Usage:
{{#invoke:String2|strip|source_string|characters_to_strip|plain_flag}}

Parameters
	source: The string to strip
	chars:  The pattern or list of characters to strip from string, replaced with ''
	plain:  A flag indicating that the chars should be understood as plain text. defaults to true.

Leading and trailing whitespace is also automatically stripped from the string.
]]
function p.strip( frame )
	local new_args = p._getParameters( frame.args,  {'source', 'chars', 'plain'} )
	local source_str = new_args['source'] or ''
	local chars = new_args['chars'] or '' or 'characters'
	source_str = mw.text.trim(source_str)
	if source_str == '' or chars == '' then
		return source_str
	end
	local l_plain = p._getBoolean( new_args['plain'] or true )
	if l_plain then
		chars = p._escapePattern( chars )
	end
	local result
	result = mw.ustring.gsub(source_str, "["..chars.."]", '')
	return result
end

--[[
Match any
Returns the index of the first given pattern to match the input. Patterns must be consecutively numbered.
Returns the empty string if nothing matches for use in {{#if:}}

Usage:
	{{#invoke:String2|matchAll|source=123 abc|456|abc}} returns '2'.

Parameters:
	source: the string to search
	plain:  A flag indicating that the patterns should be understood as plain text. defaults to true.
	1, 2, 3, ...: the patterns to search for
]]
function p.matchAny(frame)
	local source_str = frame.args['source'] or error('The source parameter is mandatory.')
	local l_plain = p._getBoolean( frame.args['plain'] or true )
	for i = 1, math.huge do
		local pattern = frame.args[i]
		if not pattern then return '' end
		if mw.ustring.find(source_str, pattern, 1, l_plain) then
			return tostring(i)
		end
	end
end

--[[--------------------------< H Y P H E N _ T O _ D A S H >--------------------------------------------------

Converts a hyphen to a dash under certain conditions.  The hyphen must separate
like items; unlike items are returned unmodified.  These forms are modified:
	letter - letter (A - B)
	digit - digit (4-5)
	digit separator digit - digit separator digit (4.1-4.5 or 4-1-4-5)
	letterdigit - letterdigit (A1-A5) (an optional separator between letter and
		digit is supported – a.1-a.5 or a-1-a-5)
	digitletter - digitletter (5a - 5d) (an optional separator between letter and
		digit is supported – 5.a-5.d or 5-a-5-d)

any other forms are returned unmodified.

str may be a comma- or semicolon-separated list

]]
function p.hyphen_to_dash( str, spacing )
	if (str == nil or str == '') then
		return str
	end

	local accept

	str = mw.text.decode(str, true )											-- replace html entities with their characters; semicolon mucks up the text.split

	local out = {}
	local list = mw.text.split (str, '%s*[,;]%s*')								-- split str at comma or semicolon separators if there are any

	for _, item in ipairs (list) do												-- for each item in the list
		item = mw.text.trim(item)												-- trim whitespace
		item, accept = item:gsub ('^%(%((.+)%)%)$', '%1')
		if accept == 0 and mw.ustring.match (item, '^%w*[%.%-]?%w+%s*[%-–—]%s*%w*[%.%-]?%w+$') then	-- if a hyphenated range or has endash or emdash separators
			if item:match ('^%a+[%.%-]?%d+%s*%-%s*%a+[%.%-]?%d+$') or			-- letterdigit hyphen letterdigit (optional separator between letter and digit)
				item:match ('^%d+[%.%-]?%a+%s*%-%s*%d+[%.%-]?%a+$') or			-- digitletter hyphen digitletter (optional separator between digit and letter)
				item:match ('^%d+[%.%-]%d+%s*%-%s*%d+[%.%-]%d+$') or			-- digit separator digit hyphen digit separator digit
				item:match ('^%d+%s*%-%s*%d+$') or								-- digit hyphen digit
				item:match ('^%a+%s*%-%s*%a+$') then							-- letter hyphen letter
					item = item:gsub ('(%w*[%.%-]?%w+)%s*%-%s*(%w*[%.%-]?%w+)', '%1–%2')	-- replace hyphen, remove extraneous space characters
			else
				item = mw.ustring.gsub (item, '%s*[–—]%s*', '–')				-- for endash or emdash separated ranges, replace em with en, remove extraneous whitespace
			end
		end
		table.insert (out, item)												-- add the (possibly modified) item to the output table
	end

	local temp_str = table.concat (out, ',' .. spacing)							-- concatenate the output table into a comma separated string
	temp_str, accept = temp_str:gsub ('^%(%((.+)%)%)$', '%1')					-- remove accept-this-as-written markup when it wraps all of concatenated out
	if accept ~= 0 then
		temp_str = str:gsub ('^%(%((.+)%)%)$', '%1')							-- when global markup removed, return original str; do it this way to suppress boolean second return value
	end
	return temp_str
end

function p.hyphen2dash( frame )
	local str = frame.args[1] or ''
	local spacing = frame.args[2] or ' ' -- space is part of the standard separator for normal spacing (but in conjunction with templates r/rp/ran we may need a narrower spacing

	return p.hyphen_to_dash(str, spacing)
end

-- Similar to [[Module:String#endswith]]
function p.startswith(frame)
	return (frame.args[1]:sub(1, frame.args[2]:len()) == frame.args[2]) and 'yes' or ''
end

--[[
_match

This function returns a substring from the source string that matches a
specified pattern. It is exported for use in other modules

Usage:
strmatch = require("Module:String")._match
sresult = strmatch( s, pattern, start, match, plain, nomatch )

Parameters
    s: The string to search
    pattern: The pattern or string to find within the string
    start: The index within the source string to start the search.  The first
        character of the string has index 1.  Defaults to 1.
    match: In some cases it may be possible to make multiple matches on a single
        string.  This specifies which match to return, where the first match is
        match= 1.  If a negative number is specified then a match is returned
        counting from the last match.  Hence match = -1 is the same as requesting
        the last match.  Defaults to 1.
    plain: A flag indicating that the pattern should be understood as plain
        text.  Defaults to false.
    nomatch: If no match is found, output the "nomatch" value rather than an error.

For information on constructing Lua patterns, a form of [regular expression], see:

* http://www.lua.org/manual/5.1/manual.html#5.4.1
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns

]]
-- This sub-routine is exported for use in other modules
function p._match( s, pattern, start, match_index, plain_flag, nomatch )
	if s == '' then
		return p._error( 'Target string is empty' )
	end
	if pattern == '' then
		return p._error( 'Pattern string is empty' )
	end
	start = tonumber(start) or 1
	if math.abs(start) < 1 or math.abs(start) > mw.ustring.len( s ) then
		return p._error( 'Requested start is out of range' )
	end
	if match_index == 0 then
		return p._error( 'Match index is out of range' )
	end
	if plain_flag then
		pattern = p._escapePattern( pattern )
	end

	local result
	if match_index == 1 then
		-- Find first match is simple case
		result = mw.ustring.match( s, pattern, start )
	else
		if start > 1 then
			s = mw.ustring.sub( s, start )
		end

		local iterator = mw.ustring.gmatch(s, pattern)
		if match_index > 0 then
			-- Forward search
			for w in iterator do
				match_index = match_index - 1
				if match_index == 0 then
					result = w
					break
				end
			end
		else
			-- Reverse search
			local result_table = {}
			local count = 1
			for w in iterator do
				result_table[count] = w
				count = count + 1
			end

			result = result_table[ count + match_index ]
		end
	end

	if result == nil then
		if nomatch == nil then
			return p._error( 'Match not found' )
		else
			return nomatch
		end
	else
		return result
	end
end

--[[
match

This function returns a substring from the source string that matches a
specified pattern.

Usage:
{{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}
OR
{{#invoke:String|match|s=source_string|pattern=pattern_string|start=start_index
    |match=match_number|plain=plain_flag|nomatch=nomatch_output}}

Parameters
    s: The string to search
    pattern: The pattern or string to find within the string
    start: The index within the source string to start the search.  The first
        character of the string has index 1.  Defaults to 1.
    match: In some cases it may be possible to make multiple matches on a single
        string.  This specifies which match to return, where the first match is
        match= 1.  If a negative number is specified then a match is returned
        counting from the last match.  Hence match = -1 is the same as requesting
        the last match.  Defaults to 1.
    plain: A flag indicating that the pattern should be understood as plain
        text.  Defaults to false.
    nomatch: If no match is found, output the "nomatch" value rather than an error.

If invoked using named parameters, Mediawiki will automatically remove any leading or
trailing whitespace from each string.  In some circumstances this is desirable, in
other cases one may want to preserve the whitespace.

If the match_number or start_index are out of range for the string being queried, then
this function generates an error.  An error is also generated if no match is found.
If one adds the parameter ignore_errors=true, then the error will be suppressed and
an empty string will be returned on any failure.

For information on constructing Lua patterns, a form of [regular expression], see:

* http://www.lua.org/manual/5.1/manual.html#5.4.1
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns

]]
-- This is the entry point for #invoke:String|match
function p.match( frame )
	local new_args = p._getParameters( frame.args, {'s', 'pattern', 'start', 'match', 'plain', 'nomatch'} )
	local s = new_args['s'] or ''
	local start = tonumber( new_args['start'] ) or 1
	local plain_flag = p._getBoolean( new_args['plain'] or false )
	local pattern = new_args['pattern'] or ''
	local match_index = math.floor( tonumber(new_args['match']) or 1 )
	local nomatch = new_args['nomatch']

	return p._match( s, pattern, start, match_index, plain_flag, nomatch )
end

--[[
Helper function to handle error messages.
]]
function p._error( error_str )
	local frame = mw.getCurrentFrame()
	local error_category = frame.args.error_category or 'Errors reported by Module String'
	local ignore_errors = frame.args.ignore_errors or false
	local no_category = frame.args.no_category or false

	if p._getBoolean(ignore_errors) then
		return ''
	end

	local error_str = '<strong class="error">String Module Error: ' .. error_str .. '</strong>'
	if error_category ~= '' and not p._getBoolean( no_category ) then
		error_str = '[[Category:' .. error_category .. ']]' .. error_str
	end

	return error_str
end

return p